Zero Skip; Hourly Report - Sharp UP-3301 Instruction Manual

■ Zero skip

You can program whether or not to skip "0" totals in each report.
Procedure

■ Hourly report

You can program the memory type and the starting time for the hourly report.
Procedure
172
Program each item as follows:
• SERVER (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the server report.
SKIP: Skips those data that are "0" sales in the server
report.
• TRANSACTION (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the transaction report.
SKIP: Skips those data that are "0" sales in the
transaction report.
• DEPARTMENT (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the department report.
SKIP: Skips those data that are "0" sales in the
department report.
• PLU (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the PLU report.
SKIP: Skips those data that are "0" sales in the PLU
report.
• HOURLY (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the hourly report.
SKIP: Skips those data that are "0" sales in the hourly
report.
• DAILY NET (Use the selective entry)
NOT SKIP: Does not skip those data that are "0" sales in
the daily net report.
SKIP: Skips those data that are "0" sales in the daily
net report.
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
15MIN: Selects the 15-minute type.
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
• STARTING TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)
NOTE
The hourly report must be cleared to change the memory type.
www.cashregisters.net