Programming; Basic Instructions; Programming Example - Sharp UP-3301 Instruction Manual

13

Programming

This chapter explains how to program various items.
Before you start programming, select the UNIT PRICE, PGM1, PGM2,
or AUTO KEY mode from the mode selection window depending on the
item you are going to program.

Basic Instructions

This section illustrates the basic programming by using an example of programming for departments.
Procedure
ENTER CANCEL
ENTER
CANCEL
ENTER CANCEL
98

■ Programming example

The following example shows how to program $2.00 for the unit
price, "ABCDE" for the description, and the scale entry to be
enabled for department 1.
1.
In the PGM2 MODE window, select "2 SETTING" by using
the or key and touch the
• The SETTING window will appear.
NOTE
• You can also select "2 SETTING" simply by touching a
corresponding line in the window.
• You can also select "2 SETTING" by touching the
keys.
ENTER
• If you return to the previous screen, touch the
2.
Select "1 ARTICLE."
• The ARTICLE window will appear.
NOTE
The mark (▼) in the lower-right corner of the window shows that
the window contains more options than are now on the screen.
To scroll the window, touch the
To return to the previous page, touch the
3.
Select "1 DEPT."
• The DEPT window will appear, listing programmable
departments.
UNIT PRICE MODE
PGM1 MODE
PGM2 MODE
AUTO KEY MODE
key.
ENTER
2
key.
CANCEL
key.
P DOWN
key.
P UP
www.cashregisters.net
and