Stacked Report - Sharp UP-3301 Instruction Manual

■ Stacked report

Your POS terminal is equipped with the stacked report printing function that enables multiple X/Z reports to
be printed in sequence with a single request.
Procedure
Select a stacked report no. from the
stacked reports list.
▼
The screen continues.
▼
The screen continues.
You can select a maximum of twenty reports from the stacked
reports list. Some reports must be set with their parameters such
as "START CODE" and "END CODE."
• 01 DEPARTMENT (Use the numeric entry)
Full department report
Parameter: Start department no./end department no. (1 thru
50)
• 02 DEPT.IND.GROUP (Use the numeric entry)
Individual group report on departments
Parameter: Department group no. (1 thru 9)
• 03 DEPT.GROUP TOTAL
Full group total report on departments
• 04 M-DOWN FOR DEPT. (Use the numeric entry)
Markdown for department report
Parameter: Start department no./end department no. (1 thru
50)
• 05 PLU (Use the numeric entry)
PLU report by designated range
Parameter: Start PLU no./end PLU no. (1 thru 999999)
• 06 PLU BY DEPT (Use the numeric entry)
PLU report by associated departments
Parameter: Department no. (1 thru 50)
• 07 PLU IND. GROUP (Use the numeric entry)
PLU report by individual group
Parameter: PLU group no. (00 thru 99)
• 08 PLU GROUP TOTAL
Full group total report on PLUs
• 09 PLU STOCK (Use the numeric entry)
PLU stock report
Parameter: Start PLU no./end PLU no. (1 thru 999999)
• 10 PLU COST (Use the numeric entry)
PLU cost report
Parameter: Start PLU no./end PLU no. (1 thru 999999)
• 11 PLU TOP 20 (Use the numeric entry)
PLU top 20 report
Parameter: AMOUNT/QUANTITY
173
www.cashregisters.net