Secret Code Programming - Sharp UP-3301 Instruction Manual

Secret Code Programming

Use the following procedures to program a secret code:
Procedure
▼
The following illustration shows those options included in the secret code programming group.
11 SECRET CODE
166
1.
In the SETTING window, select "11 SECRET CODE."
• The SECRET CODE window will appear.
2.
Select any option from the following options list:
1 Z1:
2 PGM2:
3 SYS Z1:
4 SYS PGM2:
5 INITIAL D/L:
6 MAINTENANCE D/L: Maintenance down-loading
7 CAT#2 EXECUTE:
➡ See "■ Z1 reports" on page 167.
1 Z1
➡ See "■ PGM2-mode operations" on page 167.
2 PGM2
➡ See "■ System Z1 reports" on page 168.
3 SYS Z1
➡ See "■ System PGM2-mode operations" on page 168.
4 SYS PGM2
➡ See "■ Initial down-loading" on page 169.
5 INITIAL D/L
6 MAINTENANCE D/L ➡ See "■ Maintenance down-loading" on page 169.
➡ See "■ CAT#2 execute" on page 170.
7 CAT#2 EXECUTE
Z1 reports
PGM2 operations
System Z1 reports
System PGM2 operations
Initial down-loading
CAT#2 execute
www.cashregisters.net