Sharp ER-A450T Knowledge Book page 16

6. Once selected, if the image data complies with the specifications, the image will be displayed.
7. If the image is the correct graphics, then enter the name the file is to be saved as using a *.fd
extension, then click the [ Save ] button. (Fig. 23)
8. Enter the desired name to save the image as a file to be used with the ER-02FD and click the
[ Save ] button to complete the conversion. (Fig. 24)
9. In order to use this converted file, you must copy it to a floppy diskette suitable for use with the
ER-02FD program loader.
Note:
The specifications for the floppy diskette is 720K Double-sided, Double-density.
(for detailed information about the ER-02FD floppy disk unit, please refer to the applicable service manual)
Designs and specifications are subject to change without notice.
(F .23)
IG
(F .24)
IG
Page / 15