Obtaining Configuration Files - Cisco WS-CBS3032-DEL Software Configuration Manual

Software guide
Table of Contents

Advertisement

Chapter 3
Assigning the Switch IP Address and Default Gateway
For example, in
On interface 10.0.0.2:
router(config-if)# ip helper-address 20.0.0.2
router(config-if)# ip helper-address 20.0.0.3
router(config-if)# ip helper-address 20.0.0.4
On interface 20.0.0.1
router(config-if)# ip helper-address 10.0.0.1
Note
If the switch is acting as the relay device, configure the interface as a routed port. For more information,
see the
page
Figure 3-2
DHCP server

Obtaining Configuration Files

Depending on the availability of the IP address and the configuration filename in the DHCP reserved
lease, the switch obtains its configuration information in these ways:
OL-13270-06
Figure
3-2, configure the router interfaces as follows:
"Routed Ports" section on page 11-4
11-25.
Relay Device Used in Autoconfiguration
Switch
(DHCP client)
10.0.0.2
10.0.0.1
20.0.0.2
20.0.0.3
TFTP server
The IP address and the configuration filename is reserved for the switch and provided in the DHCP
reply (one-file read method).
The switch receives its IP address, subnet mask, TFTP server address, and the configuration
filename from the DHCP server. The switch sends a unicast message to the TFTP server to retrieve
the named configuration file from the base directory of the server and upon receipt, it completes its
boot up process.
The IP address and the configuration filename is reserved for the switch, but the TFTP server
address is not provided in the DHCP reply (one-file read method).
The switch receives its IP address, subnet mask, and the configuration filename from the DHCP
server. The switch sends a broadcast message to a TFTP server to retrieve the named configuration
file from the base directory of the server, and upon receipt, it completes its boot up process.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
and the
"Configuring Layer 3 Interfaces" section on
Cisco router
(Relay)
20.0.0.1
20.0.0.4
DNS server
Assigning Switch Information
3-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst blade 3130Catalyst blade 3032

Table of Contents