Radius Change Of Authorization; Overview - Cisco WS-CBS3032-DEL Software Configuration Manual

Controlling Switch Access with RADIUS
The ACCEPT or REJECT response is bundled with additional data that is used for privileged EXEC or
network authorization. Users must first successfully complete RADIUS authentication before
proceeding to RADIUS authorization, if it is enabled. The additional data included with the ACCEPT or
REJECT packets includes these items:
•
•

RADIUS Change of Authorization

This section provides an overview of the RADIUS interface including available primitives and how they
are used during a Change of Authorization (CoA).
•
•
•
•
•
•

Overview

A standard RADIUS interface is typically used in a pulled model where the request originates from a
network attached device and the response come from the queried servers. Catalyst switches support the
RADIUS Change of Authorization (CoA) extensions defined in RFC 5176 that are typically used in a
pushed model and allow for the dynamic reconfiguring of sessions from external authentication,
authorization, and accounting (AAA) or policy servers.
Beginning with Cisco IOS Release 12.2(52)SE, the switch supports these per-session CoA requests:
•
•
•
•
This feature is integrated with the Cisco Secure Access Control Server (ACS) 5.1.
The RADIUS interface is enabled by default on Catalyst switches. However, some basic configuration
is required for the following attributes:
•
•
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
6-20
Telnet, SSH, rlogin, or privileged EXEC services
Connection parameters, including the host or client IP address, access list, and user timeouts
Overview, page 6-20
Change-of-Authorization Requests, page 6-21
CoA Request Response Code, page 6-22
CoA Request Commands, page 6-23
Session Reauthentication, page 6-24
Stacking Guidelines for Session Termination, page 6-26
Session reauthentication
Session termination
Session termination with port shutdown
Session termination with port bounce
Security and Password—refer to the
the Configuring Switch-Based Authentication chapter in the Catalyst 3750 Switch Software
Configuration Guide, 12.2(50)SE.
Accounting—refer to the "Starting RADIUS Accounting"
Authentication chapter in the Catalyst 3750 Switch Software Configuration Guide, 12.2(50)SE.
Chapter 6
"Preventing Unauthorized Access to Your Switch"
section in the Configuring Switch-Based
Configuring Switch-Based Authentication
section in
OL-13270-06