Activating The Vpn Tunnel - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Reference Manual for the ProSafe VPN Firewall FVS318v3

Activating the VPN Tunnel

You can activate the VPN tunnel by testing connectivity and viewing the VPN tunnel status
information as described in the following flowchart:
Start
Test Step 1
Fail Pass
Ping Remote
LAN IP Address
Test Step 2 Test Step 3
Fail Pass
Ping Remote View VPN
WAN IP Address Tunnel Status
End
Fix the Fix the
Router Network VPN Tunnel
and then Retest and then Retest
Figure E-4: Testing Flowchart
All traffic from the range of LAN IP addresses specified on the router at Gateway A and the router
at Gateway B will now flow over a secure VPN tunnel.
VPN Configuration of NETGEAR FVS318v3 E-5
January 2005