Introduction; Key Features Of The Vpn Firewall - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

This chapter describes the features of the NETGEAR FVS318v3 ProSafe VPN Firewall.

Key Features of the VPN Firewall

The FVS318v3 ProSafe VPN Firewall with eight-port switch connects your local area network
(LAN) to the Internet through an external access device such as a cable modem or DSL modem.
The FVS318v3 is a complete security solution that protects your network from attacks and
intrusions. Unlike simple Internet sharing firewalls that rely on Network Address Translation
(NAT) for security, the FVS318v3 uses stateful packet inspection for Denial of Service attack
(DoS) protection and intrusion detection. The FVS318v3 allows Internet access for up to 253
users. The FVS318v3 VPN Firewall provides you with multiple Web content filtering options,
plus browsing activity reporting and instant alerts — both via e-mail. Parents and network
administrators can establish restricted access policies based on time-of-day, Web site addresses
and address keywords, and share high-speed cable/DSL Internet access for up to 253 personal
computers. In addition to NAT, the built-in firewall protects you from hackers.
With minimum setup, you can install and use the firewall within minutes.
The FVS318v3 VPN Firewall provides the following features:
• Easy, Web-based setup for installation and management.
• Content filtering and site blocking security.
• Built-in eight-port 10/100 Mbps switch.
• Ethernet connection to a WAN device, such as a cable modem or DSL modem.
• Extensive protocol support.
• Login capability.
• Front panel LEDs for easy monitoring of status and activity.
• Flash memory for firmware upgrade.

Introduction

January 2005
Chapter 2
Introduction
2-1