Basic Virtual Private Networking - NETGEAR FVS318 - ProSafe VPN Firewall Router Reference Manual

Vpn firewall
Hide thumbs Also See for FVS318 - ProSafe VPN Firewall Router:
Table of Contents

Advertisement

This chapter describes how to use the virtual private networking (VPN) features of the FVS318v3
VPN Firewall. VPN communications paths are called tunnels. VPN tunnels provide secure,
encrypted communications between your local network and a remote network or computer.
The VPN information is organized as follows:
"Overview of VPN Configuration" on page 5-2
common VPN configurations: client-to-gateway and gateway-to-gateway.
"Planning a VPN" on page 5-3
parameters set by the VPN Wizard.
"VPN Tunnel Configuration" on page 5-5
tunnel: VPN Wizard (recommended for most situations) and Advanced (see
"Advanced Virtual Private
"How to Set Up a Client-to-Gateway VPN Configuration" on page 5-5
needed to configure a VPN tunnel between a remote PC and a network gateway using the VPN
Wizard and the NETGEAR ProSafe VPN Client.
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page 5-20
needed to configure a VPN tunnel between two network gateways using the VPN Wizard.
"VPN Tunnel Control" on page 5-26
verifying, deactivating, and deleting a VPN tunnel once the VPN tunnel has been configured.
Chapter 6, "Advanced Virtual Private
VPN tunnels when there are special circumstances and the VPNC recommended defaults of
the VPN Wizard are inappropriate.
Appendix C, "Virtual Private
Internet Protocol security (IPSec). IPSec is one of the most complete, secure, and
commercially available, standards-based protocols developed for transporting data.
Appendix E, "VPN Configuration of NETGEAR
configure a secure IPSec VPN tunnel from a NETGEAR FVS318v3 to a FVL328. This case
study follows the VPN Consortium interoperability profile guidelines (found at
http://www.vpnc.org/InteropProfiles/Interop-01.html).

Basic Virtual Private Networking

Basic Virtual Private Networking
provides an overview of the two most
provides the VPN Committee (VPNC) recommended default
summarizes the two ways to configure a VPN
Networking).
provides the step-by-step procedures for activating,
Networking" provides the steps needed to configure
Networking" discusses Virtual Private Networking (VPN)
January 2005
FVS318v3" presents a case study on how to
Chapter 5
Chapter 6,
provides the steps
provides the steps
5-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe fvs318v3

Table of Contents