Connecting An Ipod; Connecting A Usb Device; Connecting An Hdmi-Equipped Component To The Front Panel Input; Connecting To A Wireless Lan - Pioneer Elite VSX-60 Operating Instructions Manual

Owner's manual
Hide thumbs Also See for Elite VSX-60:
Table of Contents

Advertisement

03

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
iPod
iPhone
USB
HDMI 5 INPUT
MCACC
SETUP MIC
VIDEO
iPad
iPod/iPhone/iPad
iPod cable
(supplied)
Tip
! An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the
respective products, see
Playing an iPod
on
page
%
Switch the receiver into standby then use the supplied iPod cable to connect your iPod to
the iPod iPhone iPad USB terminal on the front panel of this receiver.
! It is also possible to connect using the cable included with the iPod, but in this case it is not possible to view
pictures via the receiver.
! For the cable connection, also refer to the operating instructions for your iPod.
! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit's power is turned on.)
! For instructions on playing the iPod, see
Playing an iPod

Connecting a USB device

It is possible to play audio and photo files by connecting USB devices to this receiver.
iPod
MCACC
iPhone
USB
SETUP MIC
VIDEO
iPad
USB mass
storage device
%
Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see
CONTROL
ON / OFF
40.
on
page
40.
CONTROL
ON / OFF
HDMI 5 INPUT
Playing a USB device
on
page
41.
Connecting an HDMI-equipped component to the front panel
input
iPod
MCACC
iPhone
USB
SETUP MIC
VIDEO
iPad
Video camera (etc.)

Connecting to a wireless LAN

Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold
AS-WL300 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AS-WL300). For instructions on making these
settings, see the operating instructions included with the wireless LAN converter (AS-WL300).
LAN
(10/100)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
)
Router
DC 5V
Ethernet
WPS
Wireless LAN converter (AS-WL300)
31
Connecting your equipment
CONTROL
ON / OFF
HDMI 5 INPUT
LAN
(10/100)
DC OUTPUT
for WIRELESS LAN
OUTPUT 5 V
(
0.6 A MAX
)
Modem
Internet
WAN
 
 
 
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents