Controls And Displays; Front Panel - Pioneer VSX-822-K Operating Instructions Manual

Chapter
1
1

Controls and displays

Front panel

1 2 3
MCACC
SPEAKERS DIMMER DISPLAY
INPUT
SELECTOR
STANDBY /ON
PHONES
10 11 12 13
1
INPUT SELECTOR dial
Selects an input source (page 25).
2
MCACC indicator
Lights when Acoustic Calibration EQ (page
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 23)).
3
Receiver control buttons
– See Switching the speaker terminal on
SPEAKERS
page 14.
– Dims or brightens the display. The brightness
DIMMER
can be controlled in four steps.
– Switches the display of this unit. The listening
DISPLAY
mode, sound volume, Speaker System (VSX-1022)/Pre Out
(VSX-822) setting or input name can be checked by
selecting an input source.
• The Speaker System/Pre Out setting may or may not be
displayed, depending on the input source you have
selected.
4
Character display
See Display on page 8.
4 5 6 7
HDMI iPod iPhone iPad
BAND TUNER EDIT TUNE PRESET ENTER
AUTO SURROUND/ ALC/ ADVANCED SOUND iPod iPhone iPad
STREAM DIRECT STANDARD SURR SURROUND RETRIEVER AIR DIRECT CONTROL
5 V 2.1 A
MCACC
VIDEO
SETUP MIC
iPod
iPhone
USB
iPad
14 15 16
5
Tuner control buttons
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands
34) is on (Acoustic
TUNER EDIT
to memorize and name stations for recall
ENTER
(page 32).
TUNE /
PRESET /
(page 32).
6
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected
7
iPod iPhone iPad indicator
Lights when an iPod/iPhone/iPad is connected and
input is selected
8
Remote sensor
Receives the signals from the remote control (see
range of remote control on page
9
MASTER VOLUME
10
STANDBY/ON
8 9
17
MASTER
VOLUME
23
(page 32).
– Use with /, PRESET /
TUNE
– Used to find radio frequencies (page 32).
– Use to select preset radio stations
(page 17).
iPod/USB
(page 27).
Operating
10).
dial
7
18 19
24 25
11
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
and
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode (S.R AIR mode can be also selected with
ADAPTER input).
12
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
Auto surround mode (page
playback (page 34).
– Press for standard decoding
ALC/STANDARD SURR
and to switch between the modes of 2 Pro Logic II, 2
Pro Logic IIx, 2 Pro Logic IIz and NEO:6, and the Auto
level control stereo mode (page
– Switches between the various
ADVANCED SURROUND
surround modes (page 34).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 23).
22
20 21 19
26 27 28 27 29
– Switches between
33) and Stream Direct
33).