Connecting Your Dvd Player With No Hdmi Output (Vsx-1022 Only) - Pioneer VSX-822-K Operating Instructions Manual

2
2
Connecting your DVD player with no HDMI
output (VSX-1022 only)
This diagram shows connections of a TV (with HDMI input)
and DVD player (or other playback component with no HDMI
output) to the receiver.
• The following connection/setting is required to listen to the
sound of the TV over this receiver.
- If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with audio
cables (as shown).
If the TV supports the HDMI Audio Return Channel
-
function, the sound of the TV can be input to the receiver
via the HDMI terminal, so there is no need to connect an
audio cable. In this case, set ARC at HDMI Setup to ON
(see HDMI Setup on page 52).
Note
• In order to listen to the audio from the TV that is connected
to this receiver using a analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 49).
• Only one component can be connected to both the optical
input terminal and coaxial input terminal. If connecting
other devices, please use a different method to connect the
audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable or
a coaxial cable, first, switch to the DVD (DVD player) or
SAT/CBL (set-top box), then use
RECEIVER
to choose the audio signal O1 (OPTICAL1) or C1
SEL
(COAXIAL1) (see Selecting the audio input signal on
page 25).
Select one
COMPONENT VIDEO OUT
VIDEO OUT
Y P P
B R
and
SIGNAL
DVD player
Select one
ANALOG AUDIO OUT DIGITAL AUDIO OUT
COAXIAL OPTICAL
R L
HDMI OUT
IN
HDMI
OUT
DVD SAT/CBL BD GAME DVR/BDR
PRE OUT
SUB WOOFER
ANTENNA
VIDEO AUDIO
AM LOOP
MONITOR SAT/CBL DVD
SAT/CBL
OUT
IN IN
IN
L
IN
IN 1 1 R
( DVD )
FM UNBAL
ASSIGNABLE
Y P P DVD SAT/CBL ANALOG IN 1 1
B R
75
( CD )
COMPONENT VIDEO
ASSIGNABLE
ANALOG
DVD IN SAT/CBL
IN1 (CD)
IN
HDMI IN
HDMI/DVI-compatible TV
19
Connecting your equipment
Set-top box
Select one
VIDEO OUT
ANALOG AUDIO OUT DIGITAL AUDIO OUT
COAXIAL OPTICAL
R L
COAXIAL
LAN (10/100)
ASSIGNABLE
OPTICAL
ASSIGNABLE
IN 1 IN 1
VIDEO
( CD ) ( TV )
COAXIAL
IN1 (CD)
ADAPTER PORT
( OUTPUT 5 V
0.1 A MAX
)
FRONT CENTER SURROUND SURROUND BACK
A
R L If the TV does not
R L R L (Single)
support the HDMI
Audio Return Channel
function, this
connection is required
to listen to the TV
CAUTION: ATTENTION:
SELECTABLE
sound over the
SPEAKER IMPEDANCE ENCEINTE D'IMPEDANCE DE
SPEAKERS
Class 2 Wiring SELECTABLE
6 -16 . 6 -16 .
receiver.
R L
OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one
OPTICAL
IN1 (TV)