Drive Chain Slack Adjustment; Drive Chain Removal - DAELIM Roadwin R Service Manual

INSPECTIONS / ADJUSTMENTS
10~20mm 10~20mm 10~20mm
10~20mm 10~20mm 10~20mm 10~20mm
10~20mm 10~20mm 10~20mm 10~20mm
10~20mm 10~20mm 10~20mm 10~20mm 10~20mm
ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT
ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT
ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT
ADJUSTING NUT ADJUSTING NUT ADJUSTING NUT
LOCK NUT
LOCK NUT LOCK NUT LOCK NUT LOCK NUT LOCK NUT LOCK NUT
LOCK NUT LOCK NUT LOCK NUT LOCK NUT
LOCK NUT LOCK NUT LOCK NUT LOCK NUT
LOCK NUT LOCK NUT LOCK NUT
130 LINKS
ROTATING DIRECTION
2-8
AXLE NUT AXLE NUT AXLE NUT AXLE NUT AXLE NUT
AXLE NUT AXLE NUT AXLE NUT AXLE NUT
AXLE NUT AXLE NUT AXLE NUT AXLE NUT
AXLE NUT AXLE NUT AXLE NUT
RETAINER CLIP RETAINER CLIP RETAINER CLIP
RETAINER CLIP RETAINER CLIP
RETAINER CLIP RETAINER CLIP RETAINER CLIP RETAINER CLIP RETAINER CLIP RETAINER CLIP
RETAINER CLIP RETAINER CLIP RETAINER CLIP
RETAINER CLIP
DRIVE CHAIN
Because there is a danger which fingers get jammed
in the drive chain, never inspect or adjust it while
the engine is running.

DRIVE CHAIN SLACK ADJUSTMENT

Turn off the ignition switch, support the motorcycle
on its main stand, and shift the transmission into
neutral.
Check slack in the lower chain with a hand midway
between the sprockets.
CHAIN SLACK : 10~20mm
Adjust the slack of drive chain if necessary.
Adjust it by loosening the axle nut, loosening both
lock nuts of adjust, and turning the adjusting nut.
Make sure that the chain adjuster scale are aligned
with the correspondidng scale graduations on both
sides of the swing arm.
Tighten the axle nut with the specified torque.
TORQUE : 8.8kgf m(88N m)
REMOVAL
In case that the drive chain becomes extremely
dirty, it should be cleaned before lubrication.
Remove the drive sprocket cover. Remove the
retainer clip.
Remove the master link, drive chain.
(chain color change : Black Gold)
Check the drive chain for adherence and damaging.
Measure the length between the chain's pins and
replace the chain if the prescribed limits are
exceeded.
Drive chain length (130 links).