Symantec SERVICEDESK 7.0 - CUSTOMIZATION GUIDE Manual page 61

Symantec® ServiceDesk Customization Guide 7.0
Click OK to return to the Stoplight configuration dialog.
Click OK to return to the Form Builder.
Add an "Auto Exit Page on Timer" component to the form, and configure as
follows:
Refresh minutes = 0
Refresh seconds = 5
Click OK to return to the main model.
5. Add an "Add Values" component after the Form Builder, and connect the Form
Builder component to the "Add Values" component. Configure as follows:
First value = Counter (use the browse capability to pick this variable)
Second value = 1 (constant)
Output value = Counter (use the browse capability to pick this variable)
6. Add an "Equals Rule" component after the "Add Values" component, and connect
the "Add Values" component to the "Equals Rule." Configure the "Equals Rule" as
follows:
Data Type = Number (integer)
Variable Name = Counter (use the browse capability to pick this variable)
Compare to = 10
7. Configure the output from the Equals Rule in the following manner:
Not equals connected to the Form Builder
Equals connected to the End Component
61