Create Emergency Disks - Symantec NORTON INTERNET SECURITY 2004 User Manual

18 Responding to emergencies

Create Emergency Disks

Create Emergency Disks
See "If you need to
use Emergency
Disks" on page 19.
w
Emergency Disks are used to start your computer in case
of a problem. If your computer can start from a CD, you
can use the product CD in place of Emergency Disks and
do not need to create them.
If you downloaded the software or do not have a CD, the
program for creating Emergency Disks (NED.exe) is
included in the download. Navigate to the location to
which you downloaded the software and begin with step
3 of these instructions.
If you cannot start your computer from a CD, you can use
these instructions to create Emergency Disks on another
computer or go to
http://www.symantec.com/techsupp/ebd.html and
download the Emergency Disk program. Follow the
instructions included in the download to create the
Emergency Disks.
You will need several formatted 1.44-MB disks.
To create Emergency Disks from the CD
1 Insert the CD into the CD-ROM drive.
2 Click Browse CD.
3 Double-click the Support folder.
4 Double-click the Edisk folder.
5 Double-click NED.exe.
6 In the welcome window, click OK.
7 Label the first disk as instructed and insert it into
drive A.
8 Click Yes.
9 Repeat steps 7 and 8 for the subsequent disks.
10 When the procedure is complete, click OK.
11 Remove the final disk from drive A.
12 Test the first disk in the set to ensure that you can
restart your computer with it.
13 Store the Emergency Disk set in a safe place.