Deploy Image Options - Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - V1 Manual

62 Imaging computers

Deploy Image options

Deploy Image options
See "Advanced Deploy Image options"
You can configure the following options while creating the Deploy Image task
See "About deploying an image"
For Linux, only the Name and Image Name fields are necessary. All of the other
fields are optional.
You can also set up advanced imaging options for this task.
See "Advanced Deploy Image options"
Deploy Image options
Table 5-7
Option
Name
Image Name
Product Key
DeployAnywhere
Sysprep
on page 63.
on page 61.
on page 63.
Description
The name of the task. This field is not labeled.
The name of the image file to deploy.
An operating system license that can be used to boot the
computer back to a working state after the task runs. If
the license has not been added to Deployment Solution,
you can add one by clicking New.
The Current Key option is available only for Windows
Vista and later versions of the Windows operating system.
An option that runs DeployAnywhere after the image is
deployed. DeployAnywhere runs while the computer is
still running the WinPE preboot operating system. This
option discovers what type of hardware is on the
destination computer and creates a new HAL. The HAL
and the required drivers that Sysprep removed are then
deployed to help the computer boot successfully.
DeployAnywhere works only from within a WinPE preboot
operating system.
Generate Sysprep configuration file using inventory
data
The required information is obtained from the CMDB.
Custom Sysprep configuration file
The required information is obtained from a custom
Sysprep file that you created.