Table of Contents
Advertisement
Adding a Barcode Value to an existing asset with
barcoder
4
If the barcode is not found on the barcode device then you can return to menu
and select New asset. Alternatively, you can go to asset scan and select, Create
new asset on unknown barcode and then scan a barcode. This displays a list
of asset types you can create.
Select the asset type.
Enter the necessary information on the barcode.
Select Save.
Use your barcode device to scan the barcode again.
5
If the barcode is found on the barcode device, the asset that it is assigned to
is displayed.
6
Select the search fields that you want.
7
Select Find.
For an asset whose data is already on the barcode device, you can use the barcode
device to add a barcode value for the asset.
If you attempt to assign a barcode to another asset that is already used, a dialog
is displayed. The dialog informs you of the resource that the barcode is already
assigned to. You are not allowed to assign that barcode to the current asset.
To add a barcode value to an existing asset with barcoder
1
Start barcoder.
See
Starting barcoder"
2
On the Main Menu screen, select Search.
3
Select the desired search options and select Find.
For example, you can enter as much of the name as you remember in the
Name field.
4
Select the Resource from the list.
5
Select Edit.
6
At the bottom of screen, select the Identity category.
7
Select Barcode and then scan the barcode.
Adding a Barcode Value to an existing asset with barcoder
on page 44.
Using Barcoder
45
Advertisement
Table of Contents
