Creating A Synchronization Profile - Symantec ALTIRIS BARCODE SOLUTION 7.0 - V1.0 Manual

16 Using Barcode Solution

Creating a synchronization profile

Creating a synchronization profile
Using Barcode Solution
1 Create a Synchronization profile.
See Creating a synchronization profile"
2 Install Barcode Manager.
See Installing Barcode Manager"
3 Synchronize existing data.
See Synchronizing data"
4 Scan assets.
See Scanning assets"
5 Upload data from the Barcode Device.
See Uploading data from the barcode device"
6 Verify the asset data.
See Verifying asset data"
7 Resolve conflicts.
See Resolving conflicts"
8 Run reports.
See Viewing Barcode Solution reports"
Before you can download asset data to the barcode device, you need to configure
synchronization profiles for the users that scan assets. You do this task from the
Synchronization Profiles page.
See Using Barcode Solution"
To create a synchronization profile
1
In the Symantec Management Console, on the Home menu, click Service and
Asset Management > Barcode.
2 In the left pane, right-click Barcode Solution > Synchronization Profiles.
3 Click New > Synchronization Profile.
In the Resources tab, select the supporting resources that are sent to the
synchronization profile. This section lets you narrow the amount of data that
is sent to the synchronization profile. We recommend that you select only
the data that this synchronization profile needs when it performs scans.
on page 16.
on page 17.
on page 18.
on page 18.
on page 19.
on page 20.
on page 21.
on page 15.
on page 19.