Table of Contents
Advertisement
Uploading data from the barcode device
Verifying asset data
3
If you have a location barcode, scan it. Otherwise, select the location of the
asset, if desired. You can also assign other details, such as the owner, cost
center, and status.
4
Click Create new asset on unknown barcode if you want to create a new asset
when a barcode is not found on the barcode device.
5
Scan the barcode.
6
Repeat this procedure until all of the assets are scanned.
After you scan asset data, you can upload it from your barcode device to the
Configuration Management Database . Only new or changed data is synchronized.
Ensure that the synchronization processes are complete before you remove a
barcode device from its cradle, or terminate a wireless connection.
See
Using Barcode Solution"
To upload data from the barcode device
1
On the barcode device, select Start > Programs > Symantec Altiris Barcoder.
2
Click Synchronization.
3
Enter the Notification Server computer login credentials and click Login.
4
Select Synchronization and click Sync.
If you select Bypass upload verification on the Permissions tab of your
Synchronization Profile console page, data is automatically uploaded to the
Configuration Management Database. If not, the data needs to be verified in
the Batch Uploads page.
By default, you need to verify your asset data before you load it into the
Configuration Management Database. You verify asset data from the Batch
Uploads page.
See
Using Barcode Solution"
To verify asset data
1
In the Symantec Management Console, on the Home menu, click Service and
Asset Management > Barcode.
2
In the left pane, click Barcode Solution > Manage Changes > Batch Uploads.
Uploading data from the barcode device
on page 15.
on page 15.
Using Barcode Solution
19
Advertisement
Table of Contents
