Creating A Power Scheme Task; Editing And Deploying Power Scheme Settings - Symantec ALTIRIS CLIENT MANAGEMENT SUITE 7.0 SP2 - V1.0 Manual

Creating a Power Scheme Task

Editing and deploying power scheme settings

To collect power scheme inventory data
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click Client Tasks > Power Scheme Tasks > Power Scheme
Inventory.
3 Select the target computers and run or schedule the task.
You can create custom power scheme management tasks, and you can specify the
power scheme settings according to your requirements.
See "About Power Scheme Task component"
For more information, see the topic about creating a task in the Symantec
Management Platform Help.
To create a Power Scheme Task
1
In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click Client Tasks.
3 Right-click the Power Scheme Tasks folder, and then click New > Task.
4
In the Create New Task dialog box, in the left pane, click Power Scheme
Settings Task.
5 In the right pane, specify the power scheme settings.
6 Click Ok.
Power Scheme Tasks let you create and activate different power scheme settings
on your managed Windows computers.
See "About Power Scheme Task component"
To perform the power scheme management tasks, you must install the Power
Scheme Agent on target computers.
See "Installing the Power Scheme Agent"
When you select the target computers, be mindful that only one power scheme
can be active on a computer at a time. When you run more than one Power Scheme
Task on a target computer, the task that runs last sets the active power scheme.
Using Power Scheme Task
Creating a Power Scheme Task
on page 15.
on page 15.
on page 17.
19