Reboot - TP-Link TL-WA801ND User Manual

Enable - Turn on/off Ping Watch Dog.
IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.
Interval - Time internal between two ping packets which are sent out continuously.
Delay - Time delay before first ping packet is sent out when the device is restarted.
Fail Count - Upper limit of the ping packet the device can drop continuously. If this value is
overrun, the device will restart automatically.
Be sure to click the Submit button to make your settings in operation.

4.7.7 Reboot

Selecting System Tools > Reboot allows you to reboot the device on the screen shown in Figure
4-37.
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
•
Change LAN IP Address (System will reboot automatically).
•
Change the Wireless configurations.
•
Change the Web Management Port.
TL-WA801ND 300Mbps Wireless N Access Point User Guide
Figure 4-36 Ping Watch Dog Utility
Figure 4-37 Reboot the device
59