Reboot And Reset The Eap - TP-Link Omada EAP620 User Manual

■ Date Mode
If you select Date Mode, manually specify an absolute time range for the daylight saving
time of the EAP. This configuration will be used only once.
The following table introduces how to configure the absolute time range.
Time Offset
Start
End
4. Click Save.

5.4 Reboot and Reset the EAP

You can reboot and reset the EAP according to your need.
To reboot and reset the EAP, go to the System > Reboot&Reset page.
• To reboot the EAP, click the
Please wait without any operation.
Specify the time to set the clock forward by.
Specify the start time of daylight saving time. The interval between the
start time and end time should be more than 1 day and less than 1 year
(365 days).
Specify the end time of daylight saving time. The interval between the
start time and end time should be more than 1 day and less than 1 year
(365 days).
button , and the EAP will be rebooted automatically.
84