Dell PowerEdge 1950 Information Update page 24

Table 1-6. New System Security Screen Options (continued)
Option
TPM Activation
TPM Clear
(No default)
Table 1-7 lists the updated information on the default Failsafe Baud Rate.
Table 1-7. Serial Communication Screen Option
Option
Failsafe Baud
Rate (115200
default)
24
Information Update
Description
Changes the operational state of the TPM.
When set to Activate, the TPM is enabled and activated
at default settings.
When set to Deactivate, the TPM is disabled and
deactivated.
The No Change state initiates no action. The operational
state of the TPM remains unchanged (all user settings for
the TPM are preserved).
NOTE:
This field is read-only when TPM Security is set
to Off.
CAUTION:
encryption keys in the TPM. This prevents booting to
the operating system and results in loss of data if the
encryption keys cannot be restored. Be sure to back
up the TPM keys prior to enabling this option.
When set to Yes, all the contents of the TPM are cleared.
NOTE:
This field is read-only when TPM Security is set
to Off.
Description
Displays the failsafe baud rate used for console redirection when
the baud rate cannot be negotiated automatically with the remote
terminal. This rate should not be adjusted.
Clearing the TPM causes loss of all