Dell PowerEdge 1950 Information Update page 19

Table 1-2. LCD Status Messages (continued)
Code
E171F
E1914
E1B01
Text
PCIE Fatal Err
B## D## F##
PCIE Fatal Err
Slot #
DRAC5 Conn2
Cbl
USB#
Overcurrent
Causes
The system BIOS
has reported a PCIe
fatal error on a
component that
resides in PCIe
configuration space
at bus ##, device
##, function ##.
The system BIOS
has reported a PCIe
fatal error on a
component that
resides in the
specified slot.
DRAC 5 cable is
missing or
disconnected.
Device plugged in
the specified USB
port caused an
overcurrent
condition.
Information Update
Corrective Actions
Remove and reseat
the PCIe expansion
cards. If the
problem persists,
see
"Troubleshooting
Expansion Cards"
in the Hardware
Owner's Manual.
Reinstall the
expansion-card riser.
See "Expansion
Card Risers" in the
Hardware Owner's
Manual.
If the problem
persists, the riser
card or system board
is faulty. See
"Getting Help"
in the Hardware
Owner's Manual.
Reconnect the
cable. See
"Installing a RAC
Card" in the
Hardware Owner's
Manual.
Reseat the device
cable. If the
problem persists,
replace or remove
the device.
19