Updating A Repository; Updating The Repository From The Hp Smartstart Cd; Updating The Repository Manually From The Hp Smartstart Cd - HP Integrity rx1620 Installation Manual

9 Updating a repository

The Auto Update feature of the
for updating repositories automatically. The Auto Update feature of the VCRM keeps servers
connected to HP for proactive delivery of the latest ProLiant and Integrity Support Packs and
components directly to a specified repository. You can configure the automatic population of
the repository during the VCRM installation, or in the event you cannot use the Auto Update
feature, you can populate the repository from the HP SmartStart CD as indicated in the
the repository from the HP SmartStart CD
for example, because you deleted a Support Pack from the repository and you later needed it,
refer to the

Updating the repository manually from the HP SmartStart CD

Updating the repository from the HP SmartStart CD

To populate the repository with ProLiant Support Packs from the HP SmartStart CD 6.0 or later:
1. Insert the HP SmartStart CD in the CD-ROM drive. The SmartStart welcome screen
appears.
2. Click Populate a version control repository with the ProLiant Support Pack available
on this HP SmartStart CD. A screen appears asking you to enter a machine name.
3. In the Machine Name field, enter the name of the machine that has the repository installed.
4. Click Populate. Click Clear to clear the Machine Name field or Back to return to the previous
screen. The SMH appears.
5. In the User field, select the appropriate login from the dropdown menu.
6. In the Password field, enter the password associated with the login that you selected.
7. Click OK. The Upload Support Pack(s) page appears.
8. To upload a ProLiant Support Pack, refer to the
HP SmartStart
Updating the repository manually from the HP SmartStart CD
To populate the repository manually with ProLiant Support Packs from the HP SmartStart CD
version 6.0 or later:
1. Insert the HP SmartStart CD in the CD-ROM drive.
2. From Windows Explorer, double-click the CD-ROM drive to open the HP SmartStart CD.
3. Click Compaq to open the directory.
4. From within the Compaq directory, click CSP to open the directory.
5. The CSP directory contains a NW directory that contains the Netware-related Support Packs,
a Linux directory for Linux-related Support Packs, and a Windows NT® directory that
contains all of the components and support packs and an XML file for each supported
Microsoft operating system. Click Linux or NT depending on the type of Support Packs with
which you want to populate your repository.
6. After you have opened one of the directories, select all of the Support Pack files, click Edit
from the Windows Explorer toolbar, and select Copy.
7. From Windows Explorer, navigate to the repository directory, for example, c:\repository.
Click the repository directory.
8. From the Microsoft Windows Explorer toolbar, click Edit and select Paste. The Support
Packs are copied into the c:\repository directory. The repository is now populated.
9. From the c:\repository directory, select a component. Right-click the component and
select Properties. Note that the file is read-only. For the VCRM to allow component
configuration, a component cannot be read-only. Deselect the read-only attribute and click
OK.
HP Version Control Repository Manager
CD.
section. If you must update the repository manually,
Updating the repository manually from the
Updating the repository from the HP SmartStart CD
is the preferred solution
Updating
section.
35