HP Integrity rx1620 Installation Manual page 12

1. Identify the versions of the VCAs that are installed that are being reconfigured to use
operating system authentication.
2. Determine whether you intend to update all of the systems with VCAs installed with ProLiant
Support Pack 7.20 or Integrity Support Pack 3.20.
3. From the system where the VCRM is installed, create a local user account and user group
specifically for version control use. If the installed VCAs are 2.0.7.10 or later, any account
name can be used, for example, vcadmin. If earlier versions of the VCA are installed and
you are not planning to upgrade the VCA, you must use an account name that matches one
of the non-administrator accounts the earlier versions of the SMH defined, for example,
operator or user.
By default, the VCA is unable to login with an account named administrator using operating
system authentication, to prevent an accidental lockout of the local administrator account.
To add operating system accounts:
1. Select Start Settings Control Panel.
2. Double-click Users and Passwords. The Users and Passwords dialog box appears.
3. From the Users tab, click Add. The Add New User dialog box appears.
4. In the User name field, enter a user name for this account.
5. In the Full name field, enter a full name for this account.
6. In the Description field, enter a brief description of this account.
7. Click Next. The Add New User dialog box appears.
8. In the Password field, enter a password for this account.
9. In the Confirm Password field, re-enter the password exactly as you entered it in the
Password field.
10. Click Next. The Add New User dialog box appears asking you to indicate what level
of access you want to grant this user.
11. Select the appropriate access level for this user:
•
•
•
12. Click Finish. The account is created and appears in the Users for this computer list.
13. Click OK to close the Users and Passwords dialog box.
4. Create a user group that includes the SMH's Administrator or Operator list, for example,
VCOperators. Add the account that you created to that group.
12 Migrating Version Control to the System Management Homepage
Standard User Users can modify the computer and install programs, but cannot
read files that belong to other users.
Restricted User Users can operate the computer and save documents, but cannot
install programs or make potentially damaging changes to the system files and
settings.
Other This option enables you to specify a custom level.
— Administrators
computer/domain. This level is required to connect from the VCA to the VCRM.
— Backup Operators
the sole purpose of backing up or restoring files.
— Guests
Guests have the same access as members of the Users group by
default, except for the Guest account which is further restricted.
— Power Users
Power Users possess most administrative powers with some
restrictions.
— Users
Users are prevented from making accidental or intentional
system-wide changes.
Administrators have complete and unrestricted access to the
Backup Operators can override security restrictions for