Custom Script File Options - HP Integrity rx1600 Deployment Manual

SurfaceScanDelay= N
SSPState = Enable|Disable
PreferredPathMode= Auto|Manual
; Array Options
; There can be multiple array specifications in the file
Array = A|B|C|D|E|F|...Z|a|b|c|d|e|f
OnlineSpare = Port:ID,
Drive = Port:ID,
DriveType= SCSI | SAS | SATA
; Logical Drive Options
; There can be multiple logical drive specifications in the file
LogicalDrive = 1|2|3|...32
RAID = 0|1|4|5|6|ADG|AUTO
Size = [N]|Max
Sectors = 32|63
StripeSize = 8|16|32|64|128|256
ArrayAccelerator= Enable|Disable
ResourceVolumeOwner= N
LogicalDriveSSPState = Enable|Disable
SSPAdaptersWithAccess = [N],[N]...|None
PreferredPath = 1|2
; HBA Options
; There can be multiple HBA specifications in the file
HBA_WW_ID = WWN
ConnectionName = UserDefinedName
HostMode = Default|Windows|Windows(degrade
|OpenVMS|Tru64|Linux|Solaris|Netware|HP|Windows_SP2_and_
Table 6-7 Custom Script File Options
Option
Action
Method
| Box:Bay,
| Box:Bay, | Port:Box:Bay,
Value
Defines if you are changing existing arrays and logical drives or adding new
ones. This option is required.
Configure: Existing arrays are not modified. Only new arrays and new logical
drives can be created in this mode.
Reconfigure: Existing arrays and logical drives might be modified in a
non-data-destructive manner. You can create new arrays, expand existing arrays,
create new logical drives, migrate existing logical drives, and extend existing
logical drives
If the -i-with-reset or -reset command line switch is used, the existing
controller configuration is cleared with data loss as the first step in the
configurations process, regardless of the setting of the Action mode.
Defines if you are in Automatic or Custom mode.
Specify Custom for a custom script.
| Port:Box:Bay | None | N
| N | *
cpqacuxe 57