Canon CanoScan D1250U2F User Manual page 5

chapter 1
Before You Begin
Contents
Glossary
Index
Welcome to ScanGear CS-U 6.3
Welcome to Canon ScanGear CS-U 6.3.
ScanGear CS-U 6.3 (hereafter referred to as ScanGear CS-U) will provide
flexible, efficient image enhancement tools for scanning with your
CanoScan D1250U2/D1250U2F Color Scanner by providing an interface
with a variety of software applications.
ScanGear CS-U has a number of powerful features that help you achieve
peak performance with your scanner. Using ScanGear CS-U, you can
preview and adjust an image before the image is scanned and acquired by
the parent software application.
Normally when you start a scanning job, you will see the ScanGear CS-U
main window with its toolbar, Preview Area, and tabs.
However, some software applications may not open the ScanGear CS-U
main window. When this occurs you cannot use the settings described in
this User's Guide because the host software application will provide the
settings so you can change the image after it is acquired. When a software
application uses ScanGear CS-U without opening the ScanGear CS-U main
window, this is called the windowless mode.
•
•
Note
Refer to the Quick Start Guide for instructions to
install and start ScanGear CS-U.
To Uninstall the ScanGear CS-U, use the CanoScan
Setup Utility CD-ROM and its "Uninstall the
Software" menu.
5