Canon CanoScan D1250U2F User Manual page 26

chapter 3
What is on the
screen?
Contents
Glossary
Index
Print Size
Use the Print size selection to set the output image size. Varying one of
Width, Height or Scale options makes the others change automatically.
Since the output resolution remains as specified in the Output Resolution
setting, any change to the Width, Height or Scale options changes the
scanning resolution accordingly.
• Width and Height Set the width and height of the image size after
scan according to the Unit in the Selection options. The initial values
are the same as those in the Selection options.
• Scale Allows you to specify the image size after scanning 25% to
400% (preset to 100%) as a percentage of the specified scan area.
When scanning films, 100% to 800% can be specified. When the
Output Resolution is 4800, 7200 or 9600 dpi, the Scale is fixed to
100%.
• Sets the scale for the image sent to the application
software and has no effect on the image displayed in the
Preview Area.
Note
Multi Crop
Click this button to perform Multi Crop function. After you place two or
more photos on the platen at a time and perform preview, click this button
to crop each photo automatically, then click [Scan] to scan and to send
each photo image to the application program. Each image will appear in
individual window in the application program. See Chapter 4 for details.
( P. 43)
26