Canon CanoScan D1250U2F User Manual page 24

chapter 3
What is on the
screen?
Contents
Glossary
Index
• The Text Enhanced selection requires more time than
the Black and White setting because digitization of the
scanned image is performed after scanning it in
Note
Grayscale.
• Selecting the Color Mode setting automatically resets
the Tone tab settings.
Output Resolution
Click the down-arrow and select one of the pre-set Resolution settings to
set the resolution for the scanning job. The default setting is 75 dpi.
Resolution can be set within the range of 25 dpi - 2400 dpi (entering a
value into the entry box increments of 1 dpi is also possible), or values of
4800, 7200 or 9600 can be entered directly.
• The higher the resolution, the better the quality of the displayed
image but the slower the scanning speed. Make sure you select a
setting based on the capability of your output device.
• You can enter the value directly into the entry box to scan. However,
an image larger than 21,000 x 30,000 pixels cannot be cropped or
scanned due to the limitations of the application program.
24