Canon CanoScan D1250U2F User Manual page 46

chapter 4
Multi-Photo
Scan
Contents
Glossary
Index
5. After pre-scanning, cropping and scanning are automatically
performed on each photo. During these procedures, do not open the
document cover. When Multi-Photo Mode scanning is finished, the
ScanGear CS-U main window appears.
6. Click the close box to close ScanGear CS-U. The scanned images will
open in the application software.
7. Save the images after adjusting them as required.
• If ScanGear CS-U is launched from the application that
cannot open two or more images at a time, a single
image of the multiple photos is sent to the application
Note
when the [Multi-Photo Mode] function is used.
46