Inserting Cage Nuts In The Rack Frame - Compaq ProLiant 2500 Installation Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-16 Overview of Installing ProLiant 2500R Server and Hardware Options
Figure 4-9. Measuring with the template
3. After marking the front of the rack, flip the template over and mark the
4. On the back of the rack, also mark the rail to show the top of the

Inserting Cage Nuts in the Rack Frame

After marking the positions for the fasteners in both the front and back of the
rack, use the fitting tool to insert cage nuts on the inside of the rails at the
marked locations. The cage nuts and fitting tool are included in the hardware kit
supplied with the rack.
1.
2.
back rails of the rack. Open the rear door of the rack to access the back
rails.
template. This will help you align a template for the next component.
Position the cage nut as shown in the following figure, on the inside of
the rail.
Hook one of the lips of the cage nut through the square rail perforation.