Preparing The Mounting Brackets And Slide Rail Assemblies - Compaq ProLiant 2500 Installation Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8 Overview of Installing ProLiant 2500R Server and Hardware Options
Preparing the Mounting Brackets
and Slide Rail Assemblies
Each pair of mounting brackets, with attached slide rail assemblies, will support
one rack-mountable server.
Figure 4-3. Rack mounting brackets; alignment tabs identify the front flanges
Each slide rail assembly consists of an outer bracket rail and an inner
component rail (see the following figure). These pieces can be separated; the
bracket rails attach to the rack mounting brackets (shown in the previous
figure), and the component rails attach to the sides of the server chassis.
CZR4-003.eps