3-16
Rack-Mount Server Installation
Figure 3-8.
3. After marking the front of the rack, turn the template over and mark the
4. On the back of the rack, mark the rail to show the top of the template.
Inserting Cage Nuts in the Rack Frame
After marking the positions for the fasteners in both the front and back of the
rack, use the fitting tool to insert cage nuts on the inside of the rails at the
marked locations. The cage nuts and fitting tool are included in the hardware kit
supplied with the rack.
1.
2.
Measuring with the template
back rails of the rack. Open the rear door of the rack to access the back
rails.
This will help you align a template for the next component.
Position the cage nut as shown in the following figure, on the inside of
the rail.
Hook one of the lips of the cage nut through the square rail perforation.