Controlling A Tuner Or Amplifier - Dish Network 3.1 User Manual

C
ONTROLLING A
Only the buttons described here control a tuner or amplifier. Some of
the buttons described here may not control your tuner or amplifier. See
the device user's manual for information.
A
UX
You must first set up the remote to control the device. See Setting Up to
Control Other Devices on page 8. Then press the AUX mode button to
set the remote to AUX mode. The AUX mode button will stay lit for
two seconds to show you've set the remote to AUX mode. Make sure to
keep the remote in AUX mode to use the following buttons.
Press the blank POWER button to turn the tuner or amplifier on or off.
Press the TV POWER button to turn the TV on or off.
M
UTE
Press this button to turn on or off the sound.
Note: Program the remote to control the device's volume by following
the instructions on page 11.
Press this button to raise (+) or lower (-) the sound volume.
Note: Program the remote to control the device's volume by following
the instructions on page 11.
T
UNER OR
M B
ODE UTTON
P B
OWER
B
UTTON
V
OLUME
A
MPLIFIER
UTTON
B
UTTON
23