Controlling A Tuner Or Amplifier - Dish Network 129418 User Manual

text_dishpvr.fm Page 27 Tuesday, March 2, 2004 12:35 PM
VCR B
UTTONS
Press the PLAY button to play a videotape or DVD.
Press the STOP button to stop playing or recording on a
videotape. Press the STOP button to stop playing a DVD.
Press the PAUSE button to pause a videotape or DVD.
Press this button or the PLAY button to play the tape or
DVD.
Press the FWD ("forward") button to forward a
videotape or DVD.
Press the BACK button to rewind a videotape or reverse a
DVD.
Press the RECORD button to record on a videotape.
C T A
ONTROLLING A UNER OR MPLIFIER
Only the buttons described here control a tuner or amplifier. Some of
the buttons described here may not control your tuner or amplifier. See
the device user's manual for information.
A M B
UX ODE UTTON
You must first set up the remote to control the device. See Setting Up to
Control Other Devices on page 8. Then press the AUX mode button to
set the remote to AUX mode. The AUX mode button will stay lit for
two seconds to show you've set the remote to AUX mode. Make sure to
keep the remote in AUX mode to use the following buttons.
27