Switching Between Tv And Amplifier Volume; Control - Dish Network Remote Control User Manual

S
WITCHING
C
ONTROL
When you set up the remote to control a TV, the MUTE and VOLUME
buttons control the TV volume, even if your remote control is in SAT
mode. However, if you want to use the AUX mode to control a tuner or
amplifier that has a volume setting, you can set up the remote to control
the equipment's volume instead of the TV volume while your remote
control is in SAT mode. Follow the instructions in the left column. To
change back to controlling the TV volume in SAT mode, follow the
instructions in the right column.
Control Amplifier Volume
1 Press and hold the AUX
mode button for three sec-
onds, and then let go of it.
The AUX mode button will
blink.
2 Press the POUND (#) but-
ton.
3
Press the plus (+) side of
the VOLUME button.
4 Press the 0 number button.
5 Press the POUND (#) but-
ton.
The AUX mode button
flashes three times.
M
AKE SURE THE REMOTE
CONTROLS THE AMPLIFIER
:
VOLUME
6 Press the SAT mode but-
ton.
7
Press the plus (+) and
minus (-) sides of the VOL-
UME button.
8
The equipment's volume
changes and the AUX mode
button lights instead of the
TV mode button.
6
B TV
ETWEEN
A
AND MPLIFIER
1 Press and hold the TV
mode button for three sec-
onds, and then let go of it.
The TV mode button will
blink.
2 Press the POUND (#)
button.
3
Press the plus (+) side of
the VOLUME button.
4 Press the 0 number button.
5 Press the POUND (#)
button.
The TV mode button
flashes three times.
M
AKE SURE THE REMOTE
'
S CONTROLS THE
6 Press the SAT mode but-
ton.
7
Press the plus (+) and
minus (-) sides of the VOL-
UME button.
8
The TV's volume changes
and the TV mode button
lights instead of the AUX
mode button
V
OLUME
Control TV Volume
TV'
S VOLUME
: