Dish Network 3.1 User Manual page 18

Enter menu options - For an option with a number, you can press
the number for that option instead of highlighting and selecting
the option.
• Enter numbers in a blank - Highlight the place where you need to
enter the number. Press a number button(s) (or, you can use the
UP/DOWN arrow buttons to enter the number).
• Search - Use the letters above the NUMBER buttons while in the
Search menu. For example, when looking for the channel and
times to watch Rudy Friml Presents, you press 7 three times for
an R, 8 two times for a U, 3 one time for a D, and 9 three times
for a Y to spell the word "Rudy" (see your receiver's User Guide
for more information).
S
TAR
Press this button to back space while using the search function of your
receiver.
P
OUND
Press this button to display the Search screen. Also, you use this
button in several procedures in this User Guide.
R
ECOVER
Use the RECOVER button if you accidentally change the channel or
video input on your TV and cannot get the picture back from your
satellite receiver. When you press the RECOVER button as described
below, the remote control sends commands to your TV to change
channels or video inputs to try to get you back to watching satellite
programming.
Note: RECOVER only works if the remote control has been set up to
control the TV and/or VCR, if connected (see Setting Up to Control
Other Devices on page 8).
(*) B
UTTON
(#) B
UTTON
B
UTTON
17