Dish Network Solo 351 User Manual page 70

4. Select the
Channel Locks
5. Highlight the channel that you want to lock. If necessary, press the UP
or DOWN ARROW button to see the channel. You can also enter each
channel number using the NUMBER PAD buttons.
6. Press the SELECT button to lock or unlock the highlighted channel. If
the box next to the channel has a mark, the channel is locked.
7. Select the
Done
8. If the receiver is not already locked, you must lock it to put the locks
you just created into effect by selecting
Locking and Unlocking the Receiver Front Panel (TV1 Only)
This keeps anyone from changing the channel, but it does not lock the
remote control buttons. This option is only available on TV1 menus.
1. Press the MENU button.
2. Select the
Locks
3. If the receiver is locked, enter the password using the NUMBER PAD
buttons. The receiver continues to display stars (*) as you enter the
digits of the password. As soon as you enter the fourth digit of the
password, the receiver highlights the
button.
4. Select the
Front Panel Lock
option.
option to save the changes.
option.
OK
option to lock or unlock the front panel.
.
Lock System
option. Press the SELECT
Using Locks
Tip: Remote
Control 1 is used to
control TV1 menus
on the nearby TV.
Remote Control 2
is used to control
TV2 menus on the
remote TV(s).
Page 65