Dish Network Solo 311 User Manual page 21

Chapter 2
Parts of the System
Page 16
U TV A
SING OR MPLIFIER
If you set up the remote to control a television, the MUTE and VOLUME
buttons - in any mode - control the TV volume. This does not apply if you use
the AUX mode to control a device that has a volume setting.
If you want to control a device programmed in the AUX mode that has a
volume setting, using any remote mode, do the following:
1. Press and hold the AUX mode button for
three seconds, then release it.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME
button.
4. Press the 0 number button.
5. Press the POUND (#) button. The AUX
mode button backlight blinks three times.
To switch back to TV volume control, do the following:
1. Press and hold the TV mode button for
three seconds, then release it.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME
button.
4. Press the 0 number button.
5. Press the POUND (#) button. The TV
mode button backlight blinks three times.
V C
OLUME ONTROL