Dish Network Solo 311 User Manual page 19

Dish networks receiver user guide
Table of Contents

Advertisement

Chapter 2
Parts of the System
Tip: This
procedure
explains how to
find out the device
code you set for
each remote
control mode.
Page 14
5. Press the either the UP or
DOWN ARROW button
repeatedly until the device
turns off.
6. Press the POUND (#) button.
7. Turn the device back on and
try some other buttons to
make sure they work.
8. Repeat this procedure until
you've tried all the codes.
C
D
C
HECK THE
EVICE
You can find out what device code you've set for each remote mode.
1. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
2. Press the POUND (#) button
twice. Watch the mode light to
determine your code. The
mode button flashes the
number for each digit of the
device code, with a pause
between the groups of flashes.
A quick flash is for zero.
For AUX mode only. The first
group of flashes tells you
what the AUX mode controls.
A quick flash (zero) before
the three-digit code is for a
TV; one regular flash is for a
VCR or DVD player; and two
flashes is for a tuner, or
amplifier.
As you press the UP or DOWN
ARROW button, the remote is
trying each code in the memory to
see if it can turn off your device.
When the device turns off, you have
found a code that might work.
Note
device will flash rapidly eight times
when you've scanned all the codes
for that device.
This stores the code you found.
Press the POWER button to turn the
device back on. Try some other
buttons to make sure they work.
Sometimes, the POWER button
works when other buttons don't.
You may need to repeat the scan to
find the best code for your device.
ODES
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the TV mode light will flash.
For example, if the code is 570, the
mode button flashes five times,
pauses, flashes seven times, pauses,
and flashes once quickly.
For example, if the TV code is 570,
the AUX mode button flashes once
quickly (indicating 0 for TV),
pauses, flashes five times, pauses,
flashes seven times, pauses, and
flashes once quickly.
: The mode button for the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite receiverDish 311

Table of Contents