Dish Network Solo 311 User Manual page 18

8. Press the POWER button to
turn off the device. If the
device does not turn off, go to
step 10.
9. Turn the device back on and
try some other buttons to
make sure they work. If the
code works for other buttons,
stop here.
10. If the code doesn't work,
repeat steps 3 through 8 with
another device code from the
tables.
11. If you can't find a code that
works try Scan for Device
Codes below.
S D C
CAN FOR EVICE
If the code for your device is not listed in the tables starting on page 65, use
this procedure to scan the remote control's memory for the device code.
1. Turn the device on.
2. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
3. For AUX mode only. Press 0
for a second TV, or 1 for a
VCR or DVD player, or 2 for
a tuner, or amplifier. Press the
STAR (*) button.
4. Press the POWER button.
If the code works, the device should
turn off.
Sometimes the POWER button
works when other buttons don't.
Try every code listed for your brand
until one works for your device.
ODES
Use the device's front panel buttons
or its remote control.
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the TV mode light will flash.
This step is for programming which
kind of device that should be
programmed in AUX mode. If
you're not programming in AUX
mode, skip to step 4.
This puts your remote in the scan
mode.
Control Other Devices with the Remote
Page 13