EchoStar Viaccess DVR-7000 User Manual page 29

2.2.4. USER LNB SETTING
This sub menu allows you to program a LNB that is not listed in the LNB selection list. Note
that the menu page is dynamic which means that it changes with the selections you make.
You can customize:
2.2.5. ABOUT ECHOSTAR
The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the
status information about the receiver. You can view:
Digital Satellite Receiver
Familiarization
I
User's LNB
To select the first or second user defined LNB.
I
Low Frequency
To enter the low frequency of the user LNB.
I
High Frequency
To enter the high frequency of the user LNB.
I
Polarity Control
To select the device that controls the polarity.
I
Band Control
To set the control signal for high or low band
selection.
I
Ku/C Control
To set the control signal for the Ku/C LNB.
I
Store settings
To confirm the selection and save the settings.
I
Company
This field shows the full name of EchoStar.
I
Address
This field shows the address of EchoStar.
I
S/W version
This field shows the current software version
loaded into the receiver.
I
Boot version
This field shows the current boot version loaded
into the receiver.
I
Web site
This field shows the EchoStar web site where you
can find the latest user and software information.
Section 4
4
Page 4 - 11