To Setup Your Peripheral Equipment; To Setup The Receiver - EchoStar Viaccess DVR-7000 User Manual

Preparation
Section 2
5.

TO SETUP YOUR PERIPHERAL EQUIPMENT

Please refer to the user manuals of your terrestrial antenna, dish, TV, video recorder and/or
audio equipment to make sure this equipment is properly installed and configured before you
install the receiver.
EchoStar recommends that you follow at least the following instructions:
5.1. THE TERRESTRIAL ANTENNA
1. Make sure:
I
The terrestrial antenna is in good condition and well aligned for the best reception
(avoid corroded contacts);
I
The UHF coaxial cable is in a good condition (no excessive bends or damaged
insulation);
I
The UHF coaxial cable connections are well shielded (metal connectors).
2. If necessary, do any work.
5.2. THE DISH
1. Make sure:
I
The outdoor components of the dish are good condition;
I
The dish is well aligned for the best reception;
I
The dish is connected with the correct RF coaxial cable (75 Ohm) and connectors;
I
The cables from the dish are in a good condition (no excessive bends or damaged
insulation).
2. If necessary, do any work.
5.3. THE TV, VIDEO RECORDER AND AUDIO EQUIPMENT
1. Make sure:
I
Safe access to the connections is available;
I
The equipment is switched off;
I
It is safe to remove and install the cables.
2. If necessary, do any work.
6.

TO SETUP THE RECEIVER

You can install the receiver safely in a convenient location if you adhere to the warning:
WARNING
D
O NOT INSTALL THE RECEIVER
I
in a closed or poorly ventilated cabinet;
I
directly on top of or under another equipment;
I
on a surface which will obstruct the ventilation slots.
D
O NOT EXPOSE THE RECEIVER AND IT
I
to rain or excessive moisture to avoid the risk of shock or permanent damage to
your receiver;
I
to direct sunlight, heaters, stoves or any other heat generating equipment;
I
to any magnetic objects, such as speakers, electric motors, transformers, etc.;
I
to excessive vibration.
Page 2 - 2
:
' :
S ACCESSORIES
EchoStar DVR-7000 Viaccess