Related Manuals for EchoStar DSB-1000 2Ci
Summary of Contents for EchoStar DSB-1000 2Ci
-
Page 1: User Manual
User Manual DIGITAL SATELLITE RECEIVER WITH COMMON INTERFACE DIGITAL FREE TO AIR-DUAL COMMON INTERFACE... -
Page 2: Table Of Contents
CONTENTS 1. Features ----------------------------------------------------------------------------- 2 Front & rear view ---------------------------------------------------------------- 4 3. Remote Control Unit (RCU) ---------------------------------------------------- 5 4. Getting started --------------------------------------------------------------------- 6 5. Operation and menu program ------------------------------------------------- 9 6. Specifications ---------------------------------------------------------------------- 19 AC power ON/OFF switch is on the rear panel of the IRD Trade Mark of the DVB Digital Video Broadcasting Project (1700) -
Page 3: Features
1. Features 1. MPEG-2 Video(MP@ML) 2. MPEG-1 Audio layer 1, layer 2 3. MPEG-2 Digital & fully DVB compliant 4. Capable of interfacing the CAMs of DVB Common Interface standard 5. Capable of scanning the frequency for SMATV system 6. Plug & Play installing program setup 7. -
Page 4: Front & Rear View
2. Front & Rear View FRONT PANEL Standby switch REAR PANEL TV Antenna i nput CAUTION VIDEO RISK OF ELECTRIC SHOCK ! DO NOT OPEN ANT IN DO NOT EXPOSE TO RAIN OR MOISTURE AUDIO TV OUT RF output conn for an audio/video ect to TV equipment like an... -
Page 5: About The Smart Card And Ca Module
About the Smart Card and CA Module To be able to receive pay-TV channels you will need a CA module and a smart card from the service provider of your choice. (The service provider is the distributor of the programs). CA modules and smart cards are licensed to service providers. -
Page 6: Remote Control Unit (Rcu)
3. Remote Control Unit (RCU) Switches the receiver ON/OFF Switches the sound ON/OFF. Direct choice of TV / radio channel and other commands by numeric keys. MENU When you want to see the main menu or return to the previous menu. EXIT Return to the current video viewing at any time Selection of program, highlighted line or parameter value. -
Page 7: Getting Started
4. Getting Started Please do NOT PLUG the receiver into mains until you finish making all connections to the unit. 1. Connect the coaxial cable from the satellite dish to the LNB IN socket of the DSB1000-2Ci. (Connector should be adapted finger-tight.) 2. - Page 8 Receiver to TV with stereo audio and video Connect the TV OUT of the DSB1000-2Ci to the RF IN of the TV set. Connect the LEFT / RIGHT AUDIO and VIDEO RCA’s of the DSB1000-2Ci to the LEFT / RIGHT AUDIO and VIDEO RCA’s of the TV set.
- Page 9 Receiver to TV, VCR with stereo Connect the TV OUT of the DSB1000-2Ci to the RF IN of VCR. Connect the RF OUT of the VCR to the RF IN connector of the TV set. Connect the VIDEO RCA of the DSB1000-2Ci to the VIDEO RCA of the VCR. Connect the LEFT / RIGHT AUDIO RCA’s of the DSB1000-2Ci to the LEFT / RIGHT AUDIO RCA’s of the TV set.
-
Page 10: Operation And Menu Program
5. Operation and Menu Program Main Menu Press MENU to display the Main Menu on the screen. Select a sub-menu using the ÙÚ keys or the numeric keys. Pl ease note that OK is always a confirmation of your selection. T o go back to the previous menu, press MENU. - Page 11 2) Ant Setting / Auto Search Refer to the blue “Signal Quality bar at the bottom of t he screen. It is recommended that the signal is at the medium level or higher. If it is not , please adjust your satellite dish. This menu is to align your dish to the selected satellite.
- Page 12 3) SMATV Configuration <Concepts> A Satellite Master Antenna Television (SMATV) system which is intended for the distribution of television and sound signals to household in one or 6 more adjacent buildings. A SMATV System represents a means for sharing the same resources among several users for satellite and terrestrial reception, and it is designed to perform the adaptation of the satellite TV signals to the SMATV channel characteristics.
- Page 13 5) Local Time Setting Local Time Setting ? [ No ] ? GMT usage Selected time zone [ London ] Time adjustment Hour [ 01 ] Minute [ 27 ] Local Time = 01 : 27 * If GMT is provided by the broadcaster, you may get the time using the GMT provided by broadcaster (or) you may get your own time.
- Page 14 7) User’s Setting User ’s Setting 1. Edit/Add SAT or TP 2. Edit LNB Local Freq. 3. Edit CH Name & PID 4. Reset(Factory Default) To add a new satellite name, press OK after moving to [ ???????? ] mode for satellite. After entering new satellite name, you can set each parameters by giving the data for Transponder Freq., LNB Polarization, Symbol Rate and FEC.
- Page 15 Edit LNB Local Frequency You can edit up to 8 local frequencies by using numeric keys. To save newly edited frequency, press OK. Edit CH Name & PID Edit Channel Name & PID Satellite Transponder Freq. Channel Name Video PID Audio PID PCR PID Index...
- Page 16 TV Channels You can select the channel you want either by pressing the numeric keys for the channel number or by moving the highlighted bar to the channel using the ÙÚ keys . Then press OK. * To change pages use the × Ø keys : Radio Channels You can select the channel you want either by pressing the numeric keys for the channel number or by moving the...
-
Page 17: Edit Tv Channel
TV Channel Lock Press OK to lock / unlock the selected channel. Locked channels will be skipped when scrolling thro ugh channels. Note) The color of the highlighted bar turns to Grey when it is on a locked channel. Edit & Erase Edit &... - Page 18 Edit TV Channel TV Channels 33. PARIS PREMIERE 34. VOYAGE [ Channel Selected ] 35. CONTACT TV CONTACT TV 36. LC I * Cancel : ? 37. Canal J * Erase Mark : ? 38. DF1 Info-Kanal * Move : ? , ? , 0~9 39.
- Page 19 Select Satellite To move to another satellite you want to watch, press the S AT key on the remote control and choose the proper satellit e with the channel up/down keys (Ù,Ú ). Press OK to confirm. Guide TV Guide Current Time = 07 : 41 CH Name 153.
-
Page 20: Specifications
6. Specifications 1. Tuner & channel Input connector Output connector Frequency range Input impedance Signal level IF frequency IF bandwidth LNB power & polarization 22kHz tone Demodulation Input symbol rate FEC decoder 2. MPEG transport stream A/V decoding Transport stream Profile &... - Page 21 TV standard Analog audio out 3 x SCART socket (TV, VCR, AUX) Resolution Output Level 2Vrms Max. Volume & Mute Control Data interface Skew control Loop through 5. PCMCIA Number of slots Type 6. RF-modulator RF-connect Frequency Output channel TV standard 7.