Table of Contents
Advertisement
TRENDnet User's Guide
5. Connect a network cable to the camera's network port and then to your router.
If you are using PoE, please ensure the cable is connected to a PoE switch or
PoE injector.
6. Wait while camera is searching.
© Copyright 2012 TRENDnet. All Rights Reserved.
7.
The founded cameras will show on the screen. The camera already selected by
default if you have only one camera installed. If you have more than one
camera in the same Network, you will need to identify the camera by the MAC
ID.
8.
You MUST change the default password of the camera. Enter the default password:
admin, Enter your new password: must be between 8 and 32 characters. (Alphanumeric:
)
a-z, A-Z,0-9
TV-IP262PI
7
Advertisement
Table of Contents
