Table of Contents
Advertisement
TRENDnet User's Guide
HTTP Notify For Motion Trigger
Send the query parameter via an HTTP notification when an event is triggered.
Host: Enter the IP of the HTTP server
Port: Enter the Port number of the HTTP server
User Name: Enter the username of the HTTP server
Password: Enter the password of the HTTP server
Query: Enter the query parameter for the request if necessary
Example:
Host:
192.168.10.1
Port:
80
Query:
xxx.cgi?name1=value1&name2=value2
Example:
cgi/event.cgi?status=#s&time=#t&model=modelname
Result:
http://192.168.10.1:80/cgi/event.cgi?status=#s&time=#t&model=modelname
© Copyright 2012 TRENDnet. All Rights Reserved.
Event Server Setting >> FTP
FTP
Host Address: Enter the IP address of the target FTP server.
Port Number: Enter the port number used for the FTP server.
User Name: Enter the user name to login into the FTP server.
Password: Enter the password to login into the FTP server.
Directory Path: Enter the destination folder for uploading the images. For
example, /TV-IP262P.
Passive Mode: Select the Enable option to enable passive mode.
FTP Upload With: Set the format of the image that is to be uploaded to the
FTP server. You can set the format as One Snapshot or images containing
Pre-event (0 ~ 3) seconds and Post-event (0 ~ 3) seconds.
The Pre-Event or Post-Event only works when video resolution set
NOTE:
up to 720P or lower. It will not work with SXGA resolution.
TV-IP262PI
23
Advertisement
Table of Contents
