DirecTV PLUS DVR User Manual page 93

Network Setup
Select "Network Setup" to setup and test the connection of your
DVR to the Internet. See Appendix 2, "How to Network Your DVR" for
details.
Remote Control
When the MODE switch on your remote is in the left-most position, it controls
your DIRECTV Receiver. However, you can also program the AV1, AV2 and TV
positions to control other equipment such as your TV, DVD, VCR or Stereo.
For Standard-Definition Receivers, select "Remote" and then select
either "Program Remote", "IR/RF Setup", or "Receiver Mode".
-Program Remote
Follow the step by step instructions to set your remote to control your TV
or other A/V equipment such as, a DVD player or surround sound system.
For best results, it is helpful to know the model number and brand of your
equipment.
This is also where you'll have the option to "Reset Remote" which clears
the AV1, AV2 and TV modes.
High
-Definition Receivers
Standard
-Definition Receivers
Parental, Fav's & Setup - System Setup
Detailed Information
CHAPTER 2 -
93