DirecTV DIRECT TV Manual page 99

The number your Receiver is currently using to call the TiVo
Service is displayed on the
1. Select "Set Dial-In Number" on the
screen displays.
2. Use the number keypad on the remote to set the area code, then press SELECT. If
you changed the area code, or if the Receiver has not made a daily call in the last
twenty-four hours, the
TiVo Service. After the phone call, press SELECT. The
appears.
3. Use the UP/DOWN arrow to choose one of the numbers on the
screen. The Receiver will use this number to access the TiVo Service. After you
press SELECT, the
• If your area code has no access numbers, you can press the LEFT arrow to
return to the
• If none of the numbers listed on the
calling area, select "None of the above." The
appear.
4. The screen appears if you selected "None of the above" on the
Dial-In Numbers screen. Select "Request 800 number authorization" on the
screen. This temporarily authorizes you to use the toll-free number
and submits a request to TiVo Customer Care. TiVo's policy is to allow you to use
the toll-free number if there are no local numbers available. TiVo will research
available dial-in numbers at your location and send a message to your Receiver
authorizing you to use the toll-free number, or suggesting a local alternative.
5. The screen appears after you have chosen a dial-in number. You
should use this screen to tell the Receiver which dialing format to use. For
screen. To change it:
screen appears and the Receiver calls the
screen will appear.
screen and try to enter a nearby area code.
screen are in your local
        4          
screen. The
screen
screen will